PoE Switch, 3xPort GigE 802.3at PoE,60W

PoE Switch, 3xPort GigE 802.3at PoE,60W

review
4
0
5
Your Price: $99.95
In Stock:
13
Part Number:TP-SW3G
  • • 3 Port Gigabit 802.3af/at PoE Unmanaged Switch Industrial Strength
  • • Accepts 802.3af/at or Passive PoE 2pair or 4 pair Input
  • • Provides two Gigabit 802.3at PoE Ports
  • • Works as a PoE/Ethernet Extender to 1000ft
  • • PoE Pinout: 3,6V+; 1,2V-, Shielded
  • SPEC SHEETS
  • USER GUIDE
Features
• 3 Gigabit Ports, Easy Plug and Play Operation
• Extends the range of PoE and Ethernet an additional 100 meters or more
• Compatible with IEEE802.3af and IEEE802.3at and IEEE802.3at 4 Pair (60W)
• No Additional Power Supply is Required
• Built-in Surge Protection
• Automatic MDI/MDI-X Crossover
• Automatic Speed and Duplex Sensing
• Low Self Power and High Temperature Operation
• CE and FCC Certification
• Compact Desktop or Wall Mount Design and Compatible with DIN Rail Adapters

Applications
• Add another PoE and Data Port without running more Ethernet Cable
• Extend Ethernet and PoE an additional 100 meters per each TP-SW3G

The TP-SW3G Power over Ethernet (PoE) 3 Port Gigabit switches offered by Tycon are fully automatic high speed Ethernet switches with up to 30W of PoE power per port.

The unit accepts Gigabit data and power via PoE into the RJ45 “PoE In” port. The PoE In port is compatible with IEEE802.3af, IEEE802.3at and IEEE802.3at 4 pair (60W). It can also accept 42-57VDC Passive PoE.

There are two fully compliant 802.3af/at Gigabit “PoE Out” ports. These ports are capable of up to 30W per port and 100m (330ft) distance.

Multiple TP-SW3G can be strung together to provide effective distances up to about 300m depending on loads. No extra power is required as the units are powered over PoE. The units are compatible with Category 5 or higher Ethernet cables. The RJ45 connectors are shielded and grounded to the case.

The units have 15kV surge protection on all Ethernet wires and are conformal coated for moisture protection. They have a wide operating temperature range for outdoor and industrial applications.
4 Stars
Business Owner
I needed a solution to connect two PLC controllers to the network without pulling a cable or adding 120v power. This switch/extender was the perfect soulution. Using POE from the existing network cable to PLC 1. Installing this switch and running Cat 6 to each PLC saved the time and expense of pulling another date line or installing a 120v outlet to feed a small netowek switch. This little gem did everything I needed and can do alot more. Definitely adding this to my tool bag of tricks going forward. I would like to see a din rail adapter however. That's the only reason I gave it 4 rating.
Did you find this helpful?  0 of 1 Found Helpful
Reviewed by:  from Wisconsin. on 12/23/2018
4

Related Items

 

Recently Viewed Items