PoE Switch, GigE 4xPoE+, 2xSFP, Mgmt,DIN

PoE Switch, GigE 4xPoE+, 2xSFP, Mgmt,DIN

Your Price: $249.95
In Stock:
Part Number:TP-SW4G-2SFP
  • • 6 Port Managed Gigabit Industrial 802.3at Mode A PoE Network Switch
  • • 4x 802.3at Mode A PoE Ports + 2x SFP/LC Fiber Ports + 1x Serial Console Port
  • • Fully Manageable PoE Port Control and L2+ Controls such as Port Mirroring, VLAN, QOS
  • • Industrial Strength, DIN Rail Mount, -40 to +80C operating temperature
  • • 12V to 57VDC Wire Terminal Input, For PoE operation requires at least 46VDC
• Industrial Strength (-40C to +80C Operating Temp)
• 4 PoE+ and 2 fiber (SFP) Ports
• 10/100/1000 Gigabit Compatible
• Manageable via Console Port or IP
• Surge Protected Voltage and Ethernet Inputs
• Integrated DIN Rail Mount
• I.T.E. Power Supply, UL Listed

• Outdoor Network Installations
• Cameras and Wireless Radios
• Factory networks

The TP-SW4G-2SFP Power over Ethernet (PoE) 6 port Gigabit switch offered by Tycon is a fully automatic high speed Layer 2+ Ethernet manageable switches. The PoE ports are Mode A (pins 1,2,3,6) type and are manageable via the user interface.

The switch features security protocols like SSH and SSL for secure access of the switch command interface. The interface can be accessed via the serial console port or any of the Ethernet ports. The command interface can be controlled via web browser, command line interface(CLI), TELNET, SSH or SNMP.

With L2+ features, the switches provide better manageability, security, QOS features and performance. VLAN, Port Mirroring, Port Isolation, IGMP Snooping, DHCP Snooping, LLDP, ARP Inspection, Storm Control, IP Source Guard, Access Control Lists, PoE+ management are just some of the features available with this Industrial PoE Switch.

Spanning Tree, Jumbo Frames, Cable diagnostics, Ring Topology are also supported.

The switches are compliant with 802.3az Energy Efficient Ethernet task force specs. The switch automatically powers down the port Ethernet drivers when a link is not active. Active mode is resumed without loss of any packets when the switch detects the link is active. They automatically adjust the signal strength depending on cable length to save power.

The switch can be powered by 12VDC to 36VDC if no PoE output is required or from 48VDC to 57VDC if PoE is required.

The optical range for fiber ports is up to 20km. The units have surge protection on all ports and are conformal coated for moisture protection.

Related Items


Recently Viewed Items