RemotePro,8W,30W Solar,432W Batt,12V 20A

RemotePro,8W,30W Solar,432W Batt,12V 20A

review
4
0
5
Your Price: $479.95
In Stock:
76
Part Number:RPPL12-36-30
  • • RemotePro Remote Solar Power System, 30W Solar, 12V 36Ah 432Wh Batt, 8W Continuous Power
  • • 12V 20A PWM Solar Charge Controller with Status Display and 20A Load Control
  • • Supports Up to 8W Continuous Power with 6hrs Peak Sun
  • • 2-4" Pole/Wall Mount Weatherpoof Lockable UV Resistant Polycarbonate Enclosure and Side of Pole Solar Mount
  • • Compact Size for Low Power Applications
  • SPEC SHEETS
  • USER GUIDE
Features
• Complete Remote Power Solution for Off-Grid operation
• Weatherproof, UV resistant, outdoor enclosures
• Enclosures can be Wall or Pole Mounted
• High Performance Valve Regulated Sealed Lead Acid Batteries
• Advanced battery charge controller protects against overcharge and over discharge

Applications
• Wireless Base Stations and Clients
• Surveillance Cameras
• Wireless Bridge and Repeaters
• Remote Sensors
• Remote Lighting
• Backup Power Systems

The RemotePro PL series (RPPL) outdoor power systems are designed for applications that require a primary off-grid power source to run various electronics. The sealed and weatherproof Polycarbonate enclosures hold up to four 12V 8.5AH batteries. The enclosures are hinged and gasket sealed. They can accept a padlock of tamper seal.

The enclosures can be mounted to a wall or pole with the included mounting bracket system.

The high quality solar panels have a 25year power output guarantee. The 30W solar panels can be mounted to a 51mm to 101mm (2" to 4") diameter pole or alternately to a wall with the included bracket kit.

Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid batteries. Most of the RPPL systems include a controller with built in POE inserter and DCDC converter to supply 24V or 48V POE from the 12V or 24V battery system. Enclosures have multiple ports for CAT5/6 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.

Batteries are an Advance Glass Matt (AGM) type which have good all temperature performance.
4 Stars
VP
Purchased this to power a 12V fuel pump on a 500 gallon tank. Installation was a breeze. The pump is a 20 amp max draw and after pumping for about 2 minutes, the controller cuts power to the load. After talking to Tycon's support team I realized I needed to connect the pump directly to the batteries.
Did you find this helpful? 
Reviewed by:  from Vermont. on 5/20/2018
4

Related Items

Recently Viewed Items