UPSPro, 24V 210W, 2400W Batt, Steel Encl

UPSPro, 24V 210W, 2400W Batt, Steel Encl

Your Price: $1,429.95
In Stock:
107
Part Number:UPS-ST24-100
  • • UPSPro 24V 100Ah 2400Wh outdoor UPSPro, 24V 120W Continuous Load out
  • • 120/240VAC (Switchable) Input, 24V 210W Regulated out Smart Battery Charger
  • • Removeable AC Power Cord and Wire Terminal DC Connections
  • • 2-4" Pole/Wall Mount Weatherpoof Powder Coat Steel Locking Enclosure with Gasketed Lid
  • • outdoor Self Contained Clean Reliable Power Backup Solution
  • SPEC SHEETS
  • USER GUIDE
Features
• Up to 120W Maximum Continuous Load Output
• Isolates Equipment from Power Line Surges
• 200AH AGM Sealed Lead Acid Batteries
• Operating Temperature -30C to +60C
• Weatherproof Nema 4X / IP65, UV Resistant, Locking Outdoor Enclosure

Applications
• Wireless Base Stations
• Security Applications
• Electric gates and fences
• Cell Towers

The UPSPro ST outdoor UPS systems are designed to provide up to 120W backup power. There is enough backup power to keep a wireless base station alive for many hours. The controller provides load control to make sure the batteries don’t over-discharge. This greatly extends the life of the batteries. The 24V load output is regulated to be sure that the voltage doesn’t exceed the maximum voltage allowed by the load. The system is powered from 120VAC or 240VAC power. In case of power failure the transition to battery power is seamless and automatic. Recovery is automatic. The controller supports GEL/AGM or wet batteries. Systems are available without batteries to save on international shipping costs.

The weatherproof vented enclosure with security locks has multiple ports for CAT5 cable, solar and other cabling. The included bracket kit allows for the enclosure to be pole mounted or wall mounted. The systems are rated to operate over a wide temperature range of -30C to +60C.

There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. The standard component layout is designed for ease of maintenance.

Equipment runs on battery power which isolates it from power line surges which is a main cause of outdoor equipment failure.

The system is also compatible with the TPSK Solar panel kits. A TPW wind turbine system can also be used as an alternate power source in addition to solar and AC power.

Related Items

Recently Viewed Items